SHAKE SHR 3D CT 50
The SHAKE SHR 3D CT-50 is a small compact 3D CT for analysis and quality control by computer tomography. It is modular and flexible in the 1-2-3D metrology. The dimensional measurement technique is extended to the measurement of surfaces and micro structures.
Device Description
The SHAKE SHR 3D CT 50 is one of the smallest industrial CT in the world. It was designed for three-dimensional measurement and workpiece examinations as well to crack and blowholes analysis. With our high-resolution SHR 3D CT 50 X-Ray system objects can be irradiated up to a diameter of 50 mm. In conjunction with the quick reconstruction "on-the-fly" dimensional volume models are calculated. Further processing of the data, for example, comparative measurements are performed with high precision at the virtual workpiece (CAD). Alternatively, the classical analysis by direkt measurement is possible.
New variant of the SHAKE SHR 3D CT 50
In this variant, the screen is integrated in the device. This creates more space on the work table. Through these modifications, our SHAKE SHR 3D CT 50 is one of the smallest industrial CTs in the world.
What can be measured using our SHAKE SHR 3D CT 50 ?
- Dimensional Measurement(wall thickness, 3D target-actual comparison)
- Reverse Engineering (return to CAD data)
- Analysis of casting defects (pores, blowholes, cracks, inclusions, core mismatch)
- Failure analysis example assembly errors and seals
- Weld inspection (plastic, aluminum, steel)
- Initial inspection (casting quality, target-actual comparison)
- Serial testing or serial monitoring e.g. in castings
- Investigation of composite materials fiber bundle layer, delamination
Advantage and benefit of the SHAKE SHR 3D CT 50
The main advantage of the SHAKE SHR 3D CT 50 is the determination of 3D information to internal and unknown geometries. Blowholes can be determined in its position and size and so the X-Ray examination are supplemented by important depth information. Based on the present data set further evaluations such as wall thickness requirements, measurement of inner and outer contours, and extractions as a surface model for standard CAD programs are possible.
Dimensions of the SHAKE SHR 3D CT 50
The dimensions of the system allows the use in almost every conceivable environment. The X-Ray machine, the reconstruction computer and the high-resolution monitor is easily suitable on an office table.
The low weight of the system (about 65 kg) is another advantage.
How does the SHAKE SHR 3D CT 50 work ?
In a against X-Ray shielded room, the test object is X-rayed. In Opposite of the X-Ray source, the detector is positioned. The test object rotates in precise increments while each section image is recorded and later computed as 3D model by the reconstruction software on a high performance computer.
Specification SHAKE SHR 3D CT 50
Strahlerleistung | 50kV (70kV) |
Strahlerstrom | 1mA |
Leistung | 50 W |
Fokusspot | < 50 μm |
Detektorfläche | 1024 x 1024 Pixel |
Pixelgröße | 48 μm |
Detektorgröße | 50 x 50 mm |
Winkelinkremente | 200 -400 |
Zoom | 1,3 - 2,5 fach |
Objektgröße | bis 34 mm Durchmesser |
Abmessungen | 500 x 400 x 310 mm |
Gewicht | ca. 65 Kg |